Furnace Installation in Cedar Park, TX
From brand-new builds to aging 2000s homes, we install furnaces that actually fit your house.
Cedar Park has grown up fast, and so has the range of heating systems across its neighborhoods. Whether you're in a recently built home off 1890 Ranch or an established subdivision near Buttercup Creek, getting the right furnace installed correctly makes a real difference in comfort and energy costs. Cold is on the Right installs high-efficiency gas and electric furnaces sized and configured for your specific home.
Licensed and insured HVAC technicians with years of experience in Cedar Park homes
Upfront pricing before any work begins — no surprises on the final invoice
Emergency service available when your heating system can't wait

























































Join the High Five Club
Your Home’s New VIP Membership!
Enjoy priority scheduling, annual tune-ups, and 10% off all plumbing & HVAC repairs.
About Our Furnace Installation in Cedar Park
Cedar Park's housing stock tells two different stories. In the newer subdivisions, homes were built with modern ductwork and HVAC platforms in mind, but that doesn't always mean the builder-grade equipment installed at move-in is still doing the job years later. In the older, established neighborhoods that have been around since the late 1990s and early 2000s, original furnaces are quietly reaching the end of their service life. Either way, a proper furnace installation starts with understanding the home, not just swapping out equipment.
Cold is on the Right works with Cedar Park homeowners to select furnaces that match their square footage, duct layout, and household needs. We handle everything from pulling permits and sizing the unit to testing airflow and making sure your thermostat is dialed in before we leave. No rushed installs, no mystery charges. Just a furnace that works right from day one.

Ready To Get Started?
Furnace Installation Services We Provide in Cedar Park
New Furnace Installation
When your existing system has run its course or a newly built home needs its first furnace, we handle the full installation from start to finish. We properly size the unit for your Cedar Park home's square footage and duct configuration so you're not overpaying to heat space or fighting uneven temperatures room to room. Permits, testing, and cleanup are all part of the job.
Furnace Replacement
Replacing an aging furnace in Cedar Park often means upgrading from a system that was installed when the neighborhood was first developed in the early 2000s. We remove the old unit, assess your ductwork for any issues, and install a modern, high-efficiency replacement that can meaningfully reduce your heating bills. We'll walk you through your options so you can make an informed decision before any work starts.
Learn MoreGas Furnace Installation
Gas furnaces remain the most common heating choice across Cedar Park, and for good reason — they heat quickly and run efficiently when properly installed. We install natural gas furnaces from leading manufacturers and make sure all gas line connections, flue venting, and safety controls are set up to code. Our technicians are licensed for gas work in Texas and take that responsibility seriously.
High-Efficiency Furnace Upgrades
Moving from a standard-efficiency furnace to a 95% or higher AFUE model can noticeably cut your winter energy bills, which adds up in a home where the heating system is running hard during those Cedar Park cold snaps. We help you evaluate whether the upfront cost makes sense for your home's age and how long you plan to stay. The right upgrade pays for itself over time.
Furnace Repair
If your furnace is acting up but not quite ready to be replaced, we can diagnose and repair the issue quickly. From igniter failures and blower motor problems to cracked heat exchangers, our technicians work on all major brands commonly found in Cedar Park homes. We'll give you an honest assessment of whether repair or replacement makes more financial sense.
Learn MoreDuctwork Assessment and Sealing
A new furnace is only as effective as the duct system it's connected to. Many Cedar Park homes, especially those built in the late 1990s, have ductwork with leaks, poor insulation, or undersized runs that undermine heating performance. Before or during installation, we inspect and seal your ducts to make sure the new system delivers heat where it's supposed to go.
Thermostat Installation and Upgrade
Pairing a new furnace with a smart or programmable thermostat lets Cedar Park homeowners take full advantage of their system's efficiency features. We install and configure thermostats that communicate correctly with your new unit, including multi-stage systems that require compatible controls. A properly matched thermostat setup prevents short cycling and unnecessary wear on your equipment.
Heating System Maintenance
Regular maintenance after installation keeps your furnace running at peak efficiency and catches small issues before they turn into service calls. We offer maintenance plans that cover annual inspections, filter checks, and system tune-ups tailored for Cedar Park homes. Staying on a maintenance schedule is especially important for homes where the system runs hard during back-to-back cold fronts in winter.
Learn MoreHeating Repairs
Beyond furnace-specific issues, heating problems can involve your air handler, heat pump components, or broader HVAC system. Our technicians diagnose and repair all types of heating failures in Cedar Park homes, getting your system back up and running without unnecessary delays. We stock common parts so we can handle most repairs in a single visit.
Learn MoreTwo-Stage and Variable-Speed Furnace Installation
Cedar Park winters can swing from mild to genuinely cold in a matter of hours, which makes two-stage and variable-speed furnaces a strong fit for this area. These systems modulate output based on how much heat is actually needed, providing more consistent temperatures and quieter operation than single-stage units. We install and calibrate these systems to match your home's specific load requirements.
Post-Installation System Testing and Commissioning
After every furnace installation, we run a full system commissioning to verify airflow, check static pressure, confirm safety controls are functioning, and test the thermostat through a complete heating cycle. This step is non-negotiable — it's how we make sure the system performs the way it should from the first time you turn it on. We don't consider the job done until everything tests out properly.
Promos, Discounts, & Rebates
Save $50
On Your First HVAC Service

10% OFF
Hero Discount

10% OFF
Seniors Discount

Furnace Installation Services We Provide in Cedar Park
- Your furnace is 15 years or older and has been requiring increasingly frequent repairs
- Your heating bills have been climbing year over year despite similar usage patterns
- Some rooms in your home stay cold while others overheat, pointing to a system that can no longer distribute heat evenly
- Your furnace is making new noises — banging, rattling, or persistent clicking — that weren't there before
- The system short cycles, turning on and off rapidly without completing a full heating run
- Your heat exchanger has been flagged as cracked or damaged, which is a safety concern that typically warrants replacement
- You're moving into a newly built Cedar Park home or a recent purchase where the existing system's age and condition are unknown


Benefits of Furnace Installation in Cedar Park
- Lower monthly energy bills from a high-efficiency system replacing an older, underperforming unit
- Consistent, even heat throughout your home — no more cold bedrooms or overheated living areas
- Improved indoor air quality with a properly vented, clean-burning system and new filtration
- Peace of mind from knowing your heating equipment is under a manufacturer's warranty
- Reduced risk of carbon monoxide exposure by replacing aging equipment with cracked or deteriorating heat exchangers
- A system properly sized for your home, which extends equipment life and reduces unnecessary wear
We Know Cedar Park Homes
Cedar Park has added neighborhoods at a pace that not every HVAC company has kept up with. We work regularly in developments ranging from the mid-2000s subdivisions near Lakeline Boulevard to the newer builds going up along Ronald Reagan Boulevard, and we know how different those homes can be in terms of duct design, equipment platforms, and builder-installed hardware. Homes built during Cedar Park's big growth years often have first-generation HVAC systems that are now hitting the end of their expected lifespan, and a straightforward swap doesn't always mean the new unit will fit the same footprint or duct layout.
The Central Texas climate also plays into how we approach installations here. Cedar Park gets enough cold days each winter to make an undersized or improperly set up furnace genuinely miserable, but the shoulder seasons are long and mild, so running costs and efficiency ratings matter just as much as raw heating capacity. We factor all of that in when we recommend equipment and configure your system, because a furnace that works well in Cedar Park is one that was installed with Cedar Park in mind.

Proudly Serving Cedar Park and Surrounding Areas
Cold is on the Right is based in the Austin area and regularly serves Cedar Park homeowners across neighborhoods like Buttercup Creek, Twin Creeks, and the newer developments off Ronald Reagan Boulevard. We also work throughout nearby communities including Leander, Round Rock, Georgetown, and Pflugerville. Wherever you are in the greater Cedar Park area, we're a local call away.
Not sure if we service your neighborhood? Give us a call at (512) 271-2172 or send us an online request today.
Why Cedar Park Homeowners Choose Us
Cedar Park is a busy place, and homeowners here don't have time for contractors who show up late, give vague estimates, or leave a job half-finished. Cold is on the Right has built its reputation in this area on being straightforward, on-time, and honest about what a job actually requires. We treat Cedar Park homes the same way we'd want someone treating ours.
Licensed and Insured
Our HVAC technicians are fully licensed in Texas and carry the insurance coverage your job requires. You're protected from start to finish.
Upfront Pricing
We give you the full price before work starts. No add-ons after the fact, no surprises when you see the invoice.
Emergency Service Available
When your furnace fails in the middle of a cold front, we're available to help. We don't leave Cedar Park homeowners waiting when heating is genuinely urgent.
We Know This Area
We work in Cedar Park regularly and understand the housing stock, common equipment, and local conditions that affect how heating systems perform here.
Financing Options for Cedar Park Homeowners
A new furnace installation is a real investment, and we don't expect every Cedar Park homeowner to pay for it out of pocket all at once. We offer financing options to help spread the cost over time so you can move forward with the right equipment rather than settling for what's cheapest upfront. Ask us about current financing terms when you call for your assessment.







